CASO DESIGN KM 1800 Black-G, Инструкция по эксплуатации

Страница: 35 / 164

35
DE
EN
FR
IT
NL
ES
CASO KM 1800 Black-G
PL
SE
PT
6.1 Safety information
ATTENTION
Please observe the safety instructions, before cleaning your device

Unplug the device when not in use and before any cleaning.

Never immerse the unit, cord or plug in water or other liquid and do not place in the
dishwasher.

Do not use iron brush, abradant, kitchen cleaner, or sharp cleaning tool for cleaning.

Do not use any aggressive or abrasive cleaning agents or solvents.

The drums of the grater, the blade of the mincer and the blades of the blender are
sharp, be careful when you need to touch them. Be careful when you handle the
blades when emptying or cleaning the extensions.
6.2 Cleaning
Remove the used accessories from the appliance and wash all parts that have
come into contact with food in hot rinsing water. Clean all
parts immediately after use. After cleaning, rinse the accessories thoroughly
in hot water and dry them immediately with a soft cloth. The bowl, accessories (dough
hook, fl at beater, whisk), splash guard and silicone dough scraper are dishwasher safe.
Wipe the motor housing with a moistened soft cloth. Make sure that the two drive
shafts are dry and clean.
7 Troubleshooting
This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
7.1 Safety notices
ATTENTION

Repairs of electrical appliances must be carried out by qualifi ed person who are
trained by the manufacturer.

Repairs performed by untrained persons may result in considerable hazards for the
user and damage the machine.
7.2 Troubleshooting table
Problem Solution
The device does
not start.
Please check whether the power plug is properly plugged.
Please check whether the assembly is done according to
assembly methods.
The device stoped.
The appliance has overheated. Set the speed level to „0“,
switch off the appliance and unplug the power plug. Remove
the ingredients from the appliance. Let the appliance cool
down for 30 minutes. Contact customer service if the food
processor does not switch on after 30 minutes.