Casio XJ-H1600, Руководство пользователя

Страница: 31 / 64

31
Image Adjustment 2 Main Menu
About the “Signal Specific” Setting Unit
For the items that have “Signal Specific” in the “Setting Unit” column of the above table, the setting is
saved for the specific type of signal (XGA/60Hz, SXGA/60Hz, etc.) that is being input when the setting
is performed, and not for a specific input source.
Volume Adjustment Main Menu
Setting Name Input Setting Unit Description
Vertical
Position R C V Signal
Specific Use this sub-menu to adjust the vertical position of the input source
image within the projection area.
Horizontal
Position R C V Signal
Specific Use this sub-menu to adjust the horizontal position of the input
source image within the projection area.
Frequency R Signal
Specific When vertical bands appear in the projected image while RGB is
selected as the input source, it means that the frequency setting is
not correct. When this happens, use this setting to adjust the
frequency manually.
Important!
If, for some reason, your manual frequency settings cause the
image input from the computer to disappear from the
projection, you can press the [AUTO] key to perform an auto
adjust operation, which should cause the image to appear.
Phase R Signal
Specific When there is flickering in the projected image while RGB is
selected as the input source, it means that the phase setting is not
correct. When this happens, use this setting to adjust the phase
manually.
Restore Menu
Defaults R C V Source
Specific Use this sub-menu to return all of the sub-menu items on the Image
Adjustment 2 main menu to their initial default settings.
z
Restoring menu defaults will restore defaults for the current signal
type (XGA/60Hz, SXGA/60Hz, etc.) only.
Setting Name Input Setting Unit Description
Volume R C V H D U N Source
Specific
Use this sub-menu to adjust the volume level of the projector’s
speaker.
z
Changing this setting when there is no input signal changes the
volume setting of the currently selected signal source.
Restore Menu
Defaults R C V H D U N Source
Specific
Use this sub-menu to return Volume to its initial default setting.
z
Restoring menu defaults when there is no input signal will restore
defaults for the currently selected input source.