85
Light Control:
Configures the Light Control settings and Light Control Off
Mode settings. Setting 2 is valid for XJ-F Series projectors
only.
PMD
RW
0: Bright, 1: Normal
2: Light Sensor On
3: Light Output 7
4: Light Output 6
5: Light Output 5
6: Light Output 4
7: Light Output 3
8: Light Output 2
9: Light Output 1
Freeze:
Switches freeze on or off.
FRZ
RW
0: Off, 1: On
Keystone Correction:
Specifies the keystone correction setting as a value that
corresponds to the typical Setup Menu “Keystone
Correction” settings below.
0:
Keystone Correction –60
60:
Keystone Correction 0
120:
Keystone Corr60
Example:
65 here, specifies a setting equivalent to
Keystone Corr5.
KST
RW
0 to 120
Keystone Corr/–:
Raises or lowers the current keystone correction setting
by 1.
+: KSP
–: KSM
W
0 to 120
Key:
Operation executed when a key is pressed.
Settings 26 through 30 are valid for network model
projectors only.
Note
Each KEY command setting corresponds to a
remote controller key. The projector operation that is
performed in response to a KEY command is
identical to the corresponding remote controller key
operation. When sending KEY commands to the
projector from an external device, make sure they
are sent in the same sequence that the
corresponding key operations are performed on the
remote controller.
KEY
W
1:
, 2:
, 3:
, 4:
5: ENTER, 6: ESC, 10: FUNC
11: MENU, 12: POWER
13: AUTO, 14: INPUT
15: TIMER, 16: ASPECT
17: BLANK, 18: FREEZE
19:
, 20: KE
21: KEYSTONE –
22: D-ZOOM +
23: D-ZOOM –
24:
25: VOLUME –
26: PLAY(
R
)
27: REWIND(
s
)
28: FORWARD(
d
)
29: PREVIOUS(
S
)
30: NEXT(
T
)
Setup Type:
Specifies how the projector is set up relative to screen for
projection.
0:
Projection to a screen in front of the projector
*
1
1:
Ceiling mounted projection from behind the screen
*
2
2:
Projection from behind the screen
*
1
3:
Ceiling mounted projection to a screen in front of the
projector
*
2
POS
RW
0 to 3
APO:
Used to change the Auto Power Off setting (trigger time
setting or Auto Power Off disable).
APO
RW
0: Off, 1: 5 minutes
2: 10 minutes, 3: 15 minutes
4: 20 minutes, 5: 30 minutes
Error:
Reads the projector error status.
STS
R
0: Normal, 1: Fan error
2: Temperature error
7: Light error, 16: Other error
Function
Command
Name
RW
Settings
Содержание XJ-F100W
Страница 102: ...MA1602 A...
