Getting Ready
E-20
Specifying the Display Message Language
A “Language” window will be projected the first time you turn on the projector. Use the menu
on this screen to specify the display language you want to use.
1.
Use the cursor [
S
] and [
T
] keys to highlight the language you want to use.
2.
Press the [ENTER] key.
z
When you turn off the projector, the lamp goes out and the projector goes into a cool
down state. Note that you will not be able to turn the projector back on again while it is
cooling down.
z
The projector may remain quite hot for a while after you turn it off. Take care when moving
the projector or otherwise handling it after use. See “Precaution when Handling the Projector
after Use” (page E-8) for more information.
z
Note that the projector may still be quite warm even after it completes its cool down
procedure. Before packing up the projector, it is recommended that you check to make sure
that the fan is stopped.
To turn off the projector
1.
Press the [
] (power) key.
z
This causes the confirmation message “Do you want to turn off the projector?” to appear
in the center of the projection screen.
z
If you do not turn off the projector the confirmation message will disappear automatically
after about 10 seconds. The confirmation message will also disappear if you press [ESC]
key.
If the serial number
starts with this letter:
You can select from among these languages:
A
English, French, German, Italian, Spanish, Swedish, Korean, Japanese
B
English, Spanish, Chinese (Simplified), Chinese (Traditional), Japanese
Turning Off the Projector
