Casio XJ-360 - XGA DLP Projector, Руководство пользователя

Страница: 38 / 60

Using the Setup Menu
38
Using the Password Input Dialog Box
The password input dialog box will appear when any one of the following occurs.
z
When you turn on the projector while the password is turned on.
z
When you turn the password on or off.
z
When you change the password.
When this dialog box is shown, perform a remote controller key operation for each of the
password input positions. The following explains how to input numbers.
z
The cursor is flashing at the first (leftmost) input position.
z
The cursor is used to select an input position for input.
z
Use the remote controller cursor keys to input the password.
z
Each time you perform a remote controller key operation, “
„
” appears at the current
input position, and the cursor moves to the next input position to the right.
z
A password can be from one to eight key operations long.
z
After performing all of the key operations you want, press the [ENTER] key.
z
To clear your input, press the [ESC] key.
To turn the power on password on and off
1.
Perform steps 1 through 4 under “Basic Setup Menu Operations” on
page 19. Select the “Detailed Settings” main menu, and then select
the “Power On Password” sub-menu item.
2.
Press the [ENTER] key.
z
This displays a password input dialog box.
3.
Input the current password.
z
The initial factory default password is: [
S
][
X
][
T
][
W
][
S
][
T
][
W
][
X
].
z
For information about how to input the password, see “Using the Password Input
Dialog Box”.
4.
Press the [ENTER] key.
z
If the password you input does not match the currently registered password, the
message “The password you input is wrong”. appears. Press the [ENTER] key to
return to step 1.
z
If the password you input matches the registered password, pressing [ENTER] above
will display the message “The password you input is correct!”. Press the [ENTER]
key to advance to the next step.