Casio QW 5531, Руководство по эксплуатации, Страница: 14 / 26

Adjusting Time
Settings Manually
You can use the procedure below to adjust the
watch’s time and day settings when GPS and
time calibration signal reception is not
possible, or communication with a phone is
not possible for some reason.
Setting a Home Time City
Use the procedure in this section to select a
city to use as your Home City. If you are in an
area that observes summer time, you can also
enable or disable summer time.
Note
●
The initial factory default summer
time setting for all cities is “AT
(AUTO)”. In many cases, the “AT
(AUTO)” setting lets you use the
watch without switching between
summer time and standard time.
●
In the cases described below,
receiving GPS position information
will automatically cause “AT
(AUTO)” to be selected for the
summer time setting.
ー
When the home city of the current
receive operation is different from
the watch’s home city setting prior
to the receive operation.
ー
When the Home City is
unchanged, but the acquired
location information is for a
geographic area with different
summer time rules (start date, end
date)
1.
Pull out the crown to the second click.
This will cause the indicator window to
show the current Home City.
●
You can find out whether or not location
information about your current Home
City is available by checking the day of
the week hand position.
“P”: Available
“N”: Not available
30
Day of the week hand
Crown
Home City
2.
Rotate the crown to change the World
Time City.
●
For information about the Home City,
see “
City List ”.
3.
Press (A).
You can find out the current summer time
setting by checking the day of the week
hand position.
30
●
“AT (AUTO)”
The watch switches between standard
time and summer time automatically.
●
“STD”
The watch always indicates standard
time.
●
“DST”
The watch always indicates summer
time.
4.
Hold down (A) for about one second to
change the summer time setting.
Each time you hold down (A) for about one
second, the setting will cycle through
options in the sequence shown below.
“AT (AUTO)”
n
“STD”
n
“DST”
5.
Push the crown back in to its normal
position.
Changing Your Home City
Time Setting in 15-minute
Steps
1.
Pull out the crown to the second click.
This will cause the indicator window to
show the current Home City.
30
Home City
Crown
2.
Hold down (C) for about one second.
The indicator window will show
l
.
30
3.
Rotate the crown to change the time and
day settings.
The data setting will change in 15-minute
increments.
30
4.
Push the crown back in.
Note
●
Changing the time setting with this
operation will cause Home City
location information to be deleted
from the watch.
Operation Guide 5531
14