Checking the Watch Charge
Level
Use the procedure below to check the current
charge level with MR-G Connected.
1.
Y
On the Home Screen, tap the “MR-G
Connected” icon.
2.
X
Hold down (C) for about 2.5 seconds.
This causes the second hand to move to
“C” and establishes a connection
between the watch and phone.
●
The second hand will point to “N” if
connection fails for some reason.
3.
Y
Use MR-G Connected to check the
charge level.
Connection
Connecting with a Phone
This section explains how to establish a
Bluetooth connection between a phone that is
paired with the watch.
●
If the watch is not paired with the phone you
want to connect with, perform the procedure
under “
Pairing the Watch with a Phone
to pair them.
1.
Move the phone close to (within one meter
of) the watch.
2.
X
While the second hand is not pointing to
“C”, hold down (C) for about 2.5 seconds.
This causes the second hand to move to
“C” and establishes a connection
between the watch and phone.
●
The second hand will point to “N” if
connection fails for some reason.
Important!
●
If you have problems establishing a
connection, it could mean that MR-
G Connected is not running on the
phone. On the phone’s home
screen, tap the “MR-G Connected”
icon. After the app starts up, hold
down the watch’s (C) button for
about 2.5 seconds.
Note
●
The connection will be terminated if
you do not perform any operation on
the watch or phone for a fixed
amount of time.
To specify the connection limit time,
perform the following operation with
MR-G Connected: “Watch
settings”
n
“Connection time”. Next,
select a setting of 3 minutes, 5
minutes, or 10 minutes.
Disconnecting from a Phone
Pressing any button terminates the Bluetooth
connection and returns the second hand to its
normal operation.
30
30
After disconnection
Connected
Unpairing
1.
X
If the watch is connected with a phone,
press any button to terminate the
connection.
30
30
After disconnection
Connected
2.
Y
On the Home Screen, tap the “MR-G
Connected” icon.
3.
Y
Perform the operation shown on the
phone screen to unpair.
Note
●
If you are unable to re-pair the watch
with a phone after unpairing them,
use the procedure below to delete
pairing information from the watch
and then perform the pairing
operation again.
A
X
Pull out the crown to the second
click.
30
Crown
B
X
Hold down (B) for about 10
seconds.
This deletes the pairing information.
The second hand will point to “C”.
C
X
Push the crown back in.
If you purchase another phone
You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
l
Pairing the Watch with a Phone
Note
●
If your previous phone is near the
watch while you are trying to pair with
a new phone, the watch will pair with
the previous phone, which makes it
impossible to pair with the new
phone. If this happens, use the
procedure below to delete the
previous pairing information from the
watch. Also, unregister the watch
from the phone you will no longer
connect with.
A
X
Pull out the crown to the second
click.
30
Crown
B
X
Hold down (B) for about 10
seconds.
This deletes the pairing information.
The second hand will point to “C”.
C
X
Push the crown back in.
Operation Guide 5531
13