QW-5311
– 22 –
22 ––
8-4. CONFIGURING HOME CITY
You can use this mode to easily switch the city
from which “TIME CALIBRATION SIGNAL TEST” is
allowed.
�)
While on the Timekeeping mode, hold down
B
and press
A
twice.
2)
Press
B
once and check that the second
hand indicates the 10-second position.
3)
Press
A
. The second hand will indicate the Home city currently configured.
4)
Each time
B
is pressed, the Home city switches in the order below.
NYC UTC LON PAR HKG TYO
Configuration of each home city
HOME CITY
Second hand position
Calibration signal
(Default)
DST Setting
(After AC)
NYC
50 second
WWVB
AUTO
UTC
0 second
—
LON
2 second
MSF/DCF77
PAR
4 second
HKG
26 second
BPC
TYO
28 second
JJY40
�)
Exit the Test mode.
Return to the Timekeeping mode by pressing
A
,
C
or by pulling out the crown and then pressing
it back in.
8-5. SOLAR CELL-PCB ASS’Y CONTACT CHECKING
�)
While on the Timekeeping mode, hold down
B
and press
A
twice.
2)
Press
B
three times and check that the second hand indicates the 20-second position.
3)
Press
A
.
The second hand moves to the 45-second position indicating “Bright”.
4)
Place the watch in a sufficiently-lit area with its face up for 5 seconds.
�)
Check that the indicating position remains the same.
�)
Place the watch on a desk with its glass face down for 5 seconds or more. Or go to a dark area
and leave the watch for 2 seconds or more. The second hand moves to the 55-second position
indicating “Dark”.
7) Exit the SOLAR CELL-PCB ASS’Y CONTACT CHECKING MODE.
Return to the Timekeeping mode by pressing any button or by pulling out the crown and then
pressing it back in.
Crown
Second hand
Location of the buttons and names of the hands
