— 7 —
3.
Use the
DDDDD
(+) and
BBBBB
(
–
)
buttons to change the
hour setting.
•
Holding down either button
changes the setting at high
speed.
•
When setting the hour
, make
sure you specify
AM (no
indicator) or PM (P) correctly
when using 12-hour
timekeeping, or that you
specify the correct 24-hour
time.
•
The same 12-hour/24-hour
format you select for the
T
imekeeping Mode home time
is also applied in the
Alarm
Mode.
4.
Press the
CCCCC
button to
select the minute setting.
•
This causes the minute digits
to flash.
5.
Use the
DDDDD
(+) and
BBBBB
(
–
)
buttons to change the
minute setting.
•
Each press of the
B
(+) or
D
(
–
) button changes the
minute setting in 1-minute
increments.
•
Holding down either button
changes the setting at high
speed.
6.
When the setting is the way you want, press the
AAAAA
button.
•
This exits the setting screen.
•
The display also will exit the setting screen automatically if
you do not perform any operation for about two or three
minutes.
(Increase)
(Decrease)
Minutes
(Increase)
(Decrease)
Y
ou can set the daily alarm in 1-minute increments.
The watch
beeps for 10 seconds when the current time in the
T
imekeeping
Mode reaches the alarm time you set.
The Hourly
T
ime signal causes the watch to beep every hour on
the hour
.
■
T
o
display the alarm screen
In the
Alarm Mode, press the
DDDDD
button to toggle the display
between the alarm screen and the Hourly T
ime Signal
screen.
Alarm Screen
•
Alarm of
f
Hourly T
ime
Signal
Screen
•
Hourly
T
ime Signal of
f
■
T
o
set the alarm time
1.
In the
Alarm Mode, press
the
DDDDD
button to display
the alarm screen.
•
When you enter the
Alarm
Mode, the screen that was
displayed when you last
exited the mode appears first.
2.
Hold down the
AAAAA
button
for about two seconds
until the hour digits of the
alarm time start to flash.
•
Displaying the alarm setting
screen automatically turns on
the alarm, which is indicated
by the alarm indicator
.
Hour
Alarm Indicator
Using the Alarm and Hourly Time Signal
■
T
o
turn the alarm on or off
1.
In the
Alarm Mode, use the
DDDDD
button to display the alarm
screen.
2.
Press the
AAAAA
button to toggle the alarm on (
“
”
displayed) or off (
“
”
displayed).
Alarm Of
f
Alarm T
ime
Alarm Indicator
Alarm On
■
T
o
stop the alarm beeper
Press any button.
■
T
o
test the alarm
In the
Alarm Mode, hold down the
D
button to sound the alarm.
■
T
o
turn the hourly time signal on or off
1.
In the
Alarm Mode, use the
DDDDD
button to display the
Hourly T
ime Signal screen.
2.
Press the
AAAAA
button to toggle the Hourly T
ime Signal on
(“
”
) or off (
“”
).
Hourly T
ime
Signal
Of
f
Hourly T
ime
Signal
On
Hourly T
ime
Si
g
nal Indicator
■
T
o
perform elapsed time measurement
In the Stopwatch Mode, press the
DDDDD
button to start and
stop elapsed time measurement.
(Split/Reset)
(Start/Stop)
■
Stopwatch Mode Display Screens
•
Elapsed T
ime Screen
The display shows the minutes and seconds.
Minutes
Seconds
•
Paused Elapsed T
ime Measurement Screen
When elapsed time measurement is paused, the display alternates
between a minute/second screen and a 1/100 second screen at
2-second
intervals.
2-second
Intervals
Minutes
Seconds
1/100 Second
Stopwatch Mode
The stopwatch measures elapsed time in units of 1/100 second up to 59 minutes, 59.99 seconds (60 minutes total). When the maxim
um
limit is reached, the elapsed time automatically returns to zero and timing continues from there.