Casio QW-3210 Скачать руководство пользователя страница 8

Operation Guide 3210

E-69

Display

Display fi gures may be diffi cult to read when viewed from an angle.

 

x

Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage 
or loss suffered by you or any third party arising through the use of this product or 
its malfunction.

E-68

Metal Components

 Failure to clean dirt from a metal band can lead to formation of rust, even if the 

 

x

band is stainless steel or plated. If the watch is exposed to sweat or water, wipe it 
thoroughly with a soft, absorbent cloth and then store it in a well-ventilated location 
to dry.
 To clean the band, use a soft toothbrush or similar tool to scrub it with a weak 

 

x

solution of water and a mild neutral detergent. Take care to avoid getting solution on 
the watch case.

Bacteria and Odor Resistant Band

 The bacteria and odor resistant band protects against odor generated by the 

 

x

formation of bacteria from sweat, which ensures good comfort and hygiene. In order 
to ensure maximum bacteria and odor resistance, keep the band clean. Use an 
absorbent soft cloth to wipe the band clean of dirt, sweat, and moisture. The bacteria 
and odor resistant band suppresses the formation of organisms and bacteria. It does 
not protect against rash due to allergic reaction, etc.

E-67

Natural Leather and Imitation Leather Bands

 Allowing the watch to remain in contact with other items or storing it together with 

 

x

other items while it is wet for long periods can cause the color of the other items 
to transfer to the natural leather or imitation leather band of the watch. Be sure to 
dry off the watch thoroughly before storing it and make sure it is not in contact with 
other items.
 Leaving a leather band where it is exposed to direct sunlight (ultraviolet rays) for 

 

x

long periods or failure to clean dirt from a leather band for long periods can cause it 
to become discolored.

Important!

 Subjecting a natural leather or imitation leather band to rubbing or dirt can cause 

 

x

color transfer and discoloration.

E-66

 Leaving the watch where it is exposed to direct sunlight (ultraviolet rays) for long 

 

x

periods or failure to clean dirt from the watch for long periods can cause it to 
become discolored.
 Friction caused by certain conditions (frequent external force, sustained rubbing, 

 

x

impact, etc.) can cause discoloration of painted components.
 If there are printed fi gures on the band, strong rubbing of the printed area can cause 

 

x

discoloration.
 Failure to clean dirt from the watch for long periods can cause fl uorescent color to 

 

x

fade. Wash dirt off with water as soon as possible and then dry the watch.
 Semi-transparent resin parts can become discolored due to sweat and dirt, and if 

 

x

exposed to high temperatures for long periods.
 Contact an authorized CASIO Service Center to have resin components replaced. 

 

x

Note that you will be charged for replacement costs.

E-65

 Electrostatic charge can cause the display to go blank momentarily or cause a 

 

x

rainbow effect on the display.

Chemicals

 Do not allow the watch to come into contact with thinner, gasoline, solvents, oils, or 

 

x

fats, or with any cleaners, adhesives, paints, medicines, or cosmetics that contain 
such ingredients. Doing so can cause discoloration of or damage to the case, resin 
band, leather band, and other parts.

Storage

 If you do not plan to use the watch for a long time, wipe it thoroughly free of all dirt, 

 

x

sweat, and moisture, and store it in a cool, dry place.

Resin Components

 Allowing the watch to remain in contact with other items or storing it together with 

 

x

other items for long periods while it is wet can cause the color of the other items 
to transfer to the resin components of the watch. Be sure to dry off the watch 
thoroughly before storing it and make sure it is not in contact with other items.

E-64

Impact

 Your watch is designed to withstand impact incurred during normal daily use and 

 

x

light activity such as playing catch, tennis, etc. Dropping the watch or otherwise 
subjecting it to strong impact, however, can lead to malfunction. Note that watches 
with shock-resistant designs (G-SHOCK, Baby-G, G-ms) can be worn while 
operating a chain saw or engaging in other activities that generate strong vibration, 
or while engaged in strenuous sports activities (motocross, etc.).

Magnetism

 Though your watch normally is not affected by magnetism, very strong magnetism 

 

x

(from medical equipment, etc.) should be avoided because it can cause malfunction 
and damage to electronic components.

Electrostatic Charge

 Exposure to very strong electrostatic charge can cause the watch to display 

 

x

the wrong time. Very strong electrostatic charge even can damage electronic 
components.

E-63

 Deterioration, rust, or corrosion of the band can cause it to break, which may result 

 

x

in the watch falling off your wrist and becoming lost. Be sure to take good care of the 
band and keep it clean. Should you notice any breakage, discoloration, looseness 
or other problem with the band, immediately contact your original retailer or an 
authorized CASIO Service Center to have it checked, repaired, or replaced. Note 
that you will be charged for any repair or replacement of the band.

Temperature

 Never leave the watch on the dashboard of a car, near a heater, or in any other 

 

x

location that is subject to very high temperatures. Do not leave the watch where it 
will be exposed to very low temperatures, either. Temperature extremes can cause 
the watch to lose or gain time, to stop, or otherwise malfunction.
 Leaving the watch in an area hotter than +60°C (140°F) for long periods can lead to 

 

x

problems with its LCD. The LCD may become diffi cult to read at temperatures lower 
than 0°C (32°F) and greater than +40°C (104°F).

E-62

 Some water-resistant watches come with fashionable leather bands. Avoid 

 

x

swimming, washing, or any other activity that causes direct exposure of a leather 
band to water.
 The inside surface of the watch glass may fog when the watch is exposed to 

 

x

a sudden drop in temperature. No problem is indicated if the fogging clears up 
relatively quickly. If the fogging does not clear or if water has gotten into the watch, 
take it in for repair immediately.
 Continued use of the watch with water inside can result in damage to electronic and 

 

x

mechanical components, the face of the watch, etc.

Band

 Tightening the band too tightly can cause you to sweat and make it diffi cult for air 

 

x

to pass under the band, which can lead to skin irritation. Do not fasten the band too 
tightly. There should be enough room between the band and your wrist so you can 
insert your fi nger.

E-61

 Do not use this watch for scuba diving or other types of diving that requires air tanks.

 

x

 Watches that do not have WATER RESIST or WATER RESISTANT marked on the 

 

x

back cover are not protected against the effects of sweat. Avoid using such a watch 
under conditions where it will be exposed to large amounts of sweat or moisture, or 
to direct splashing with water.
 Even if a watch is water-resistant, do not operate its buttons or crown while it is 

 

x

submersed in water or wet.
 Even if a watch is water-resistant, avoid wearing it in the bath or in areas where 

 

x

detergents (soap, shampoo, etc.) are being used. Such conditions can reduce water 
resistance.
 After submersion in seawater, use plain water to rinse all salt and dirt from the 

 

x

watch.
 To maintain water resistance, have the gaskets of your watch replaced periodically 

 

x

(about once every two or three years).
 A trained technician will know how to check your watch for proper water resistance 

 

x

whenever you have its battery replaced. Battery replacement requires the use of 
special tools. Always request battery replacement from your original retailer or from 
an authorized CASIO Service Center.

E-60

Operating Precautions

Water Resistance

 The following applies to watches with WATER RESIST or WATER RESISTANT 

 

x

marked on the back cover.

 

Water 
Resistance 
Under Daily 
Use

Enhanced Water Resistance Under Daily 
Use

Atmospheres

10 

Atmospheres

20 

Atmospheres

Marking

On watch front or on 
back cover

No 

BAR mark

5BAR

10BAR

20BAR

Example of 
Daily Use

Hand washing, rain

Yes

Yes

Yes

Yes

Water-related work, 
swimming

No

Yes

Yes

Yes

Windsurfi ng

No

No

Yes

Yes

Skin diving

No

No

Yes

Yes

Содержание QW-3210










Отзывы: