Operation Guide 3210
E-39
Setting the Timer Start Time
In the Timer Mode, hold down
1.
A
for about two seconds until the hour digits of the
start time start to fl ash.
[SET hold] will appear on the display. After that, the timer start time setting screen
x
will appear.
If a timer countdown operation is in progress, press
x
D
to stop it and then press
B
to reset the timer to its start time before performing the above step.
If a timer countdown operation is paused, press
x
B
to reset the timer to its start
time before performing the above step.
Each press of
2.
C
causes the fl ashing to move between
the hour and the minute digits.
The fl ashing digits are the ones that are selected.
x
Use
3.
B
(+) and
D
(–) to change the hour and minute
settings.
Holding down either button scrolls the setting at high
x
speed.
To specify a timer start time of 24 hours, set the time to
x
0H 00’00 on the display.
E-38
Timer
The timer start time can be set in one-minute increments up to 24 hours. The watch till
sound a beeper or vibrate for about 10 seconds when the end of the timer countdown
is reached.
Entering the Timer Mode
In the Timekeeping Mode, press
1.
C
four times to enter
the Timer Mode.
E-37
Measuring Elapsed Time
The following shows button operations for elapsed time measurements.
Elapsed Time Measurement
D
D
D
D
B
Start
Stop
Restart
Stop
Reset
Split Time Measurement
D
B
B
D
B
Start
Split
(Time frozen on
display.)
Release split
(Display returns
to elapsed time.)
Stop
Reset
Note
Once started, elapsed time measurement continues until you press the
x
B
button to
stop it, even if you change to a different mode and even if the stopwatch reaches the
elapsed time measurement limit.
If you change to another mode while a split time is frozen on the display, the split
x
will be released.
E-36
Stopwatch
The stopwatch measures elapsed time in units of 1/100 seconds up to 23 hours,
59 minutes, 59.95 seconds. Elapsed time returns to zero automatically and timing
continues from there when the maximum limit is reached.
Entering the Stopwatch Mode
In the Timekeeping Mode, press
1.
C
three times to
enter the Stopwatch Mode.
[STW] will appear on the display for about one
x
second, and then the stopwatch screen will appear.
E-35
After all the settings are the way you want, press
6.
A
to exit the setting screen.
The alarm icon appears when an alarm is turned on, while the hourly time signal
x
icon appears when the hourly time signal is turned on.
Alarm On
Hourly Time Signal On
To return to the Timekeeping Mode, press
7.
C
four times.
Stopping the Alarm
Pressing any button while the alarm tone is sounding will stop it.
1.
Testing the Alarm
In the Alarm Mode, hold down
1.
D
to sound the alarm.
E-34
Hold down
3.
A
for about two seconds until the hour digits of the current alarm time
start to fl ash.
[SET hold] will appear on the display. After that, the alarm time setting screen
x
will appear.
Each press of
4.
C
causes the fl ashing to move between
the hour and the minute digits.
The fl ashing digits are the ones that are selected.
x
Use
5.
B
(+) and
D
(–) to change the hour and minute
settings.
Holding down either button scrolls the setting at high
x
speed.
If you are using 12-hour timekeeping, the [P] indicator
x
will appear for times between noon and 11:59 p.m.
E-33
Use
2.
B
to select the alarm time or to turn the hourly time signal on or off.
Alarm Types
: Alarm does not sound. (Alarm off)
:
Alarm sounds only once at the preset time
and does not sound again after that.
: Alarm sounds at the preset time each day.
Hourly Time Signal
: Hourly time signal does not sound.
:
Hourly time signal sounds every hour on
the hour.
E-32
Changing the Alarm Time Setting
In the Alarm Mode, use the
1.
D
button to select the alarm (1 through 5) whose time
setting you want to change.
Alarm 1 (
)
Alarm 3 (
)
Alarm 4 (
)
Alarm 2 (
)
Alarm 5 (
)
Hourly Time Signal (
)
E-31
Entering the Alarm Mode
In the Timekeeping Mode, press
1.
C
twice to enter the Alarm Mode.
[ALARM] will appear on the display for about one second, and then an alarm
x
setting screen (Alarm 1 through Alarm 5) will appear.
Alarm setting screen
Hourly time signal screen
E-30
Alarms and Hourly Time Signal
You can set up to fi ve different alarms. When any one of the alarm times is reached
in the Timekeeping Mode, the watch will sound an alarm beeper or vibrate for about
10 seconds.
The hourly time signal causes the watch to beep or vibrate every hour on the hour.
Содержание QW-3210
Страница 1: ......
