INTRODUCTION
19
Data Error Precautions
• Your digital camera is manufactured using precision
digital components. Any of the following creates the risk
of corruption of data in file memory.
— Removing the batteries or memory card from the
camera, or connecting the USB cable to the camera
while the camera is performing a record or memory
access operation
— Removing the batteries or memory card from the
camera, or connecting the USB cable to the camera
while the operation lamp is still flashing after you turn
off the camera
— Disconnecting the USB cable or disconnecting the AC
adaptor from the camera while a USB data
communication operation is being performed
— Low battery power
*
Note that continued use of weak batteries can lead to
malfunction of the camera. Replace the batteries with
new ones as soon as possible after signs of low
power appear.
— Other abnormal operations
Any of the above conditions can cause an error message to
appear on the monitor screen (page 202). Follow the
instructions provided by the message to eliminate the
cause of the error.
Operating conditions
• This camera is designed for use in temperatures ranging
from 0
°
C to 40
°
C (32
°
F to 104
°
F). When using the
alkaline batteries that come bundled with the camera,
certain conditions (the amount of time the batteries spent
in storage before being used, operating temperature,
recording conditions) can cause failure of the camera to
operate at temperatures below 5
°
C (41
°
F). Because of
this, use of rechargeable nickel metal hydride batteries is
recommended.
• Do not use or keep the camera in the following areas.
— In areas subject to direct sunlight
— In areas subject to high humidity or dust
— Near air conditioners, heaters, or other areas subject
to temperature extremes
— Inside of a closed vehicle, especially one parked in the
sun
— In areas subject to strong vibration
