Casio Privia PX-S3100, Руководство пользователя

Страница: 50 / 96

EN-49
Digital Piano Operations
Use the procedures in this section to delete a single song in
its entirety, or a particular track of a song.
■
To delete a MIDI recorder song
1.
Use the 3 mode selector button to cycle
through settings until the “SONG” (SONG
Mode) indicator is lit.
2.
Use the bk
–
and bl
+
buttons to select the
song number of the MIDI recorder song you
want to delete.
• Song numbers 11 through 15 are for songs recorded
with the MIDI recorder. If necessary, you can touch
8
a
to play back the song and check its contents.
3.
Hold down the bo
REC
0
button until “Song
Clear” appears on the display.
4.
Touch bm
ENTER
.
This causes “Sure?” to appear on the display.
5.
To delete the song, touch bl
+
. To exit this
operation without deleting anything, touch
bk
–
.
■
To delete a particular MIDI recorder track
1.
Perform steps 1 through 3 under “ To delete a
MIDI recorder song ” (page EN-49 ).
2.
Use the bk
U
and bl
I
buttons to display
“Track Clear” and then touch bm
ENTER
.
3.
Use the bk
U
and bl
I
buttons to display the
track you want to delete.
4.
Touch bm
ENTER
.
This displays “Sure?”
5.
To delete the track, touch bl
+
. To exit this
operation without deleting anything, touch
bk
–
.
The audio recorder records Digital Piano keyboard play as
audio data. Recordings are stored as WAV files (linear PCM,
16bit, 44.1kHz, stereo) to the USB flash drive in the Digital
Piano’s
cq
USB Type A port.
• Never remove the USB flash drive while Audio
Recorder recording or playback is in progress. Doing
so can corrupt the data on the USB flash drive and
damage the
cq
USB
Type A port.
• For precautions when handling a USB flash drive, see
“ USB Flash Drive ” (page EN-60 ).
• For information about the USB flash drive formats
supported by your Digital Piano, see “ Supported USB
Flash Drives ” (page EN-60 ).
■ To prepare to use the audio recorder
1.
Perform the steps below to put the Digital
Piano into the Audio Mode.
*
(1) Hold down the bp
^
button until “[FUNCTION]”
appears on the display.
This enters the FUNCTION Mode.
(2) Use the bk
U
and bl
I
buttons to select the
following menu items in sequence: “SONG”
3
“Song Type”.
(3) Use the bk
–
and bl
+
buttons to change the setting
to “Audio”.
(4) To exit the FUNCTION mode, hold down bp
EXIT
until “[FUNCTION]” disappears from the display.
2.
Insert the USB flash drive into the Digital
Piano’s
cq
USB Type A port.
• Carefully push the USB flash drive in as far as it will
go. Do not use undue force when inserting the USB
flash drive.
• When the Digital Piano detects the USB flash drive,
the message “MOUNTING” will appear on the display.
Do not perform any operation while this message is
displayed. Wait until it disappears.
* Your Digital Piano has two recorders: a MIDI recorder and
an audio recorder. Depending on the type of data you want
to record or play back, you first need to select the MIDI
Mode or Audio Mode.
Deleting a MIDI Recorder Song
To delete this track: Display this:
System Track System
Solo Track 1 Solo 1
Solo Track 2 Solo 2
Using the Audio Recorder to
Record Performances
cq
USB Type A port
USB flash drive