background image

E-46

Using a Memory Card

You can save Digital Piano registration data to a 
commercially available SD memory card, if you want.

z

Use a memory card with a capacity of 2GB or less. 
Use of a card with a capacity that is greater than 
2GB or other types of memory cards is not 
supported.

z

In this manual, mentions of a “memory card” refer 
to an SD memory card.

Types of Data

Card and Card Slot Precautions

IMPORTANT!

• Be sure to observe the precautions provided in the 

documentation that comes with the memory card.

• Memory cards have a write-protect switch. Use it 

when you want to protect the data on the card from 
accidental deletion.

• Avoid using a memory card under the following 

conditions. Such conditions can corrupt data stored 
on the memory card.

• Never touch the contacts of a memory card when 

loading it or removing it from the Digital Piano.

• Never eject the memory card while data is being 

written to or loaded from it. Doing so can corrupt the 
data on the memory card and damage the memory 
card slot.

• Never insert anything besides a memory card into 

the card slot. Doing so creates the risk of 
malfunction.

• Electrostatic charge from your fingers or the memory 

card to the card slot can cause malfunction of the 
Digital Piano. If this happens, turn the Digital Piano 
off and then back on again.

• A memory card can become quite warm after very 

long use in the memory card slot. This is normal and 
does not indicate malfunction.

To load and remove a memory card

IMPORTANT!

• A memory card must be positioned correctly when 

being loaded into the Digital Piano. Trying to force 
an improperly oriented memory card into the slot can 
damage the memory card and the slot.

1.

With the top of the memory card facing 
upwards (so you can see it), carefully insert it 
into the Digital Piano’s memory card slot (

dn

until stops with a click.

2.

To remove the memory card first press it into 
the slot further.

This will cause the memory card to disengage and eject 
partially. Pull the memory card the rest of the way out 
of the slot.

To format a memory card

IMPORTANT!

• Format a memory card before using it for the first 

time.

• Before formatting a memory card, make sure it does 

not have any valuable data stored on it.

• The memory card format operation performed by this 

Digital Piano is a “quick format”. If you want to 
completely delete all of the data on the memory 
card, format it on your computer or some other 
device.

1.

Insert the memory card you want to format 
into the Digital Piano’s memory card slot.

Make sure the write-protect switch of the memory card 
is not in the write-protect position so writing is enabled.

2.

Press the 

bs

 

(FUNCTION)

 button.

3.

Press the 

cq

 

(7)

 button.

Data Type

Description 
(File Name Extension)

Supported 

Operations

Save to 

Memory 

Card

Load from 

Memory 

Card

Registration 
(page E-34)

Digital Piano setups 
(CB6, CR6)

O

O

• Areas subjected to high temperature, high 

humidity, or corrosive gas

• Areas subjected to strong electrostatic charge and 

digital noise

Memory Card Operations

Top

MASTER CONTROL

CARD PLAYER

Содержание PRIVIA PX-3S







































































Отзывы: