English
Selecting and Playing a Tone
E-15
To use layer and split together
1.
Use the “Tone List” (page E-57) to look up the
group(s) and numbers of the tones (UPPER 1,
UPPER 2, LOWER 1, and LOWER 2 zone
tones) you want to use.
2.
Check to make sure that the both the
cs
(LAYER)
and
ct
(SPLIT)
button lamps are
unlit.
•
If one or both lamps are lit, press the
cs
(LAYER)
and
ct
(SPLIT)
buttons to turn them off.
3.
Press the
4
(UPPER 1)
button so its lamp is
lit.
•
This indicates you can select the UPPER 1 zone tone.
4.
Select the UPPER 1 zone tone.
•
For details about selecting tones, see “To select a
tone” (page E-11).
5.
Press the
cs
(LAYER)
button so its lamp is lit.
•
This will cause the
5
(UPPER 2)
button lamp to
light. This indicates you can select the UPPER 2 zone
tone.
6.
Select the UPPER 2 zone tone.
7.
Press the
cs
(LAYER)
button so its lamp is
unlit.
8.
Press the
ct
(SPLIT)
button so its lamp is lit.
•
This will cause the
2
(LOWER 1)
button lamp to
light. This indicates you can select the LOWER 1 zone
tone.
9.
Select the LOWER 1 zone tone.
10.
Press the
cs
(LAYER)
button so its lamp is lit.
•
This will cause the
3
(LOWER 2)
button lamp to
light. This indicates you can select the LOWER 2 zone
tone.
11.
Select the LOWER 2 zone tone.
12.
Play something on the left and right sides of
the keyboard to confirm that the tones are
assigned and layered properly.
•
You can change any of the zone tones at any time by
performing one of the operations shown below.
LOWER 1
UPPER 1
LOWER 2
UPPER 2
Lit
Lit
Lit
Unlit
To change this
zone’s tone:
Do this:
UPPER 1 zone
Press the
4
(UPPER 1)
button and
then select a tone.
UPPER 2 zone
Press the
5
(UPPER 2)
button and
then select a tone.
LOWER 1 zone
Press the
2
(LOWER 1)
button and
then select a tone.
LOWER 2 zone
Press the
3
(LOWER 2)
button and
then select a tone.
Lit
Lit
Lit
Lit