Casio PCR-T273 Скачать руководство пользователя

Страница: 8 / 74

E-8

Manufacturer:CASIO COMPUTER CO., LTD.

6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan

Responsible within the European Union:CASIO EUROPE GmbH

CASIO-Platz 1, 22848 Norderstedt, Germany

Please keep all information for future reference.

The declaration of conformity may be consulted at http://world.casio.com/

This mark applies in EU
countries only.

The main plug on this equipment must be used to disconnect mains power.

Please ensure that the socket outlet is installed near the equipment and shall be easily acces-

sible.

WARNING

THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT THIS PRODUCT MAY

CAUSE RADIO INTERFERENCE IN WHICH CASE THE USER MAY BE REQUIRED TO TAKE

ADEQUATE MEASURES.

This product is also designed for IT power distribution

system with phase-to-phase voltage 230 V.

Laite on liitettävä suojamaadoituskostkettimilla vaurstettuun pistorasiaan

Apparatet må tilkoples jordet stikkontakt

Apparaten skall anslutas till jordat nätuttag.

FCC WARNING:

Changes or modifications not expressly approved by

the party responsible for compliance could void the user’s authority to operate

the equipment.

WARNING:

This equipment has been tested and found to comply with the limits for

a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THE UNIT IN THE U.S.A.

(Not applicable to other areas)

Precautions for Use

SES700_INC-e.indb 8

2013/09/02 11:27:43

Содержание PCR-T273











































































Результаты поиска

Содержание PCR-T273

Отзывы:

Похожие инструкции для PCR-T273

Бренды по названию

Популярные бренды

Casio PCR-T273, Руководство пользователя

Результаты поиска

Содержание PCR-T273

Отзывы:

Похожие инструкции для PCR-T273

Бренды по названию

Популярные бренды