Casio MX-X300 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 90

Casio MX-X300 Скачать руководство пользователя страница 29

EN-28

Using the Pattern Sequencer

4.

Configure the settings below as required.

5.

Touch “

0

”.

•

This enters record standby, indicated by “



” flashing

on the screen.

•

The settings below can be configured during record
standby.

6.

Touch “



” to start recording.

This causes the on-screen “



” to change to “

Y

”.

•

Only the operations below can be perform while
recording is in progress.
Metronome on/off
Tempo change
Solo on/off
Octave change

7.

After you are finished recording, touch “

Y

”.

8.

Repeat steps 2 through 7 as required to
record other parts and/or the parts of other
elements.

9.

Touch

bo

EXIT

to return to the RHYTHM

EDIT MENU screen.

10.

Save the edited rhythm using the procedure
under “Saving a User Rhythm” (page EN-34).

Item

Description

Setting

Tone name Changes the tone.

Tones that can be selected
depend on the part type.

See the separate
Appendix.

Mixer Edit Adjusts the balance

between instruments.

See “To adjust
the balance
between parts”
(page EN-33).

Solo

Plays back the currently
selected part only.

Off, On

Octave

Changes the pitch of the
keyboard in octave units
during recording.

–3 to +3

Tempo

Changes the tempo.

20 to 255

Display:
Item name

Description

Setting

Chord:
Playback chord

Starting recording of an
accompaniment pattern starts
repeat playback of all the parts
of the pattern, except for the part
being recorded. During such
repeat playback, you can use this
setting to specify the chord type
to be used for playback by bass
and chord parts. Available
settings are “C” (C major), “C7”
(C 7th), and “Cm” (C minor).
Selecting “Off” turns off bass
and chord part notes.

Off, C,
C7, Cm

Quantize:
Quantize

Specify either recording of notes
in the timing they are played on
the keyboard (Off) or automatic
alignment of notes with a base
note (setting other than Off).

Off,

2

,

6

, ,

7

,

Precount:
Pre-count

Specifies whether a pre-count
should sound before recording
starts after “



” is touched in

record standby. Selecting “1”
sounds a one-measure pre-
count, while “2” sounds a two-
measure pre-count. Selecting
“Off” turns off the pre-count, so
recording starts as soon as “



”

is touched.

Off, 1, 2

Metronome:
Metronome

Specifies whether the
metronome should sound (On)
or not sound (Off) during
recording.

Off, On

«
...
27
28
29
30
31
...
»

Содержание MX-X300



























































































Отзывы:

Нет отзывов