Casio MX-X300, Руководство пользователя, Страница: 21 / 90

EN-20
Editing a Tone (User Tones)
Limiter Limits the input signal level so it does not rise above a preset
level.
Limit (X) Adjusts the volume level of the limit at which limiting is applied. 0 to 127
Attack Adjusts the attack amount of the input signal. 0 to 127
Release Adjusts the time from the point the input signal drops below a
certain level until the limit operation is stopped. 0 to 127
Wet Level (Y) Adjusts the level of the effect sound. Output volume changes in
accordance with the Limit setting and the characteristics of the
input tone. Use this parameter to correct for such changes. 0 to 127
Dry Level Adjusts the level of the direct sound. 0 to 127
Enhancer Enhances the profiles of the low range and high range of the
input signal.
Low Frequency Adjusts the low range enhancer frequency. 0 to 127
Low Gain Adjusts the low range enhancer gain. 0 to 127
High Frequency (X) Adjusts the high range enhancer frequency. 0 to 127
High Gain (Y) Adjusts the high range enhancer gain. 0 to 127
Input Level Adjusts the input level. 0 to 127
Wet Level Adjusts the level of the effect sound. 0 to 127
Dry Level Adjusts the level of the direct sound. 0 to 127
Early Reflection An effector that extracts early reflections from reverb.
Applies acoustic presence to notes.
Wet Level (Y) Adjusts the level of the effect sound. 0 to 127
Feedback (X) Adjusts the repeat of the reflected sound. 0 to 127
Tone Adjusts the tone of the reflected sound. 0 to 127
Input Level Adjusts the input level. 0 to 127
Dry Level Adjusts the level of the direct sound. 0 to 127
Phaser Produces a distinctive pulsating, broad sound by using an LFO to
change the phase of the input signal and then mixes it with the
original input signal.
Resonance Adjusts the strength of feedback 0 to 127
Manual Adjusts the reference phaser shift amount. –64 to 0 to +63
LFO Rate (X) Adjusts the LFO rate. 0 to 127
LFO Depth (Y) Adjusts the LFO depth. 0 to 127
LFO Waveform Selects the LFO waveform. Sin, Tri, Random
Input Level Adjusts the input level. 0 to 127
Wet Level Adjusts the level of the effect sound. 0 to 127
Dry Level Adjusts the level of the direct sound. 0 to 127
DSP type/Parameter Description Settings