Time Adjustment
You can use the watch operations in this
section to adjust current date and time
settings.
Using Watch Operations to
Adjust the Time Setting
You can use the watch operations below to
adjust current date and time settings, and to
set your Home City.
●
Setting a Home City
Use the procedure in this section to select a
city to use as your Home City. If you are in an
area that observes summer time, you can also
configure a summer time setting.
1.
Enter the Timekeeping Mode.
l
Navigating Between Modes
2.
Hold down (A) for at least two seconds.
Release the button when [ADJ] appears
on the display.
Releasing the button will cause the city
code and city name to appear on the
display.
City code
City name
3.
Use (B) and (D) to change the Home City
setting.
●
For details refer to the information
below.
l
City Table
4.
Press (C).
5.
Use (D) to select a summer time setting.
Each press of (D) cycles through available
settings in the sequence shown below.
●
[OFF]
The watch always indicates standard
time.
●
[ON]
The watch always indicates summer
time.
6.
Press (A) to complete the setting
operation.
●
Setting the Time/Date
1.
Enter the Timekeeping Mode.
l
Navigating Between Modes
2.
Hold down (A) for at least two seconds.
Release the button when [ADJ] appears
on the display.
Releasing the button will cause the city
code and city name to appear on the
display.
City code
City name
3.
Keep pressing (C) until the setting you
want to change is flashing.
●
Each press of (C) moves the flashing to
the next setting in the sequence shown
below.
Summer time
Home City
Minutes
Hours
Seconds
Illumination duration
Day
Month
Year
12/24-hour timekeeping
Operation tone enable/disable
Power Saving
Watch Operation Guide 5550
9