4.
Configure the date and time settings.
●
To reset the seconds to 00: Press (D).
1 is added to the minutes when the
current count is between 30 and 59
seconds.
●
For all the other settings, use (B) and (D)
to change the flashing setting.
5.
Repeat steps 3 and 4 to select time and
date settings.
6.
Press (A) to complete the setting
operation.
●
Switching between 12-hour and 24-
hour Timekeeping
You can specify either 12-hour format or 24-
hour format for the time display.
1.
Enter the Timekeeping Mode.
l
Navigating Between Modes
2.
Hold down (A) for at least two seconds.
Release the button when [ADJ] appears
on the display.
Releasing the button will cause the city
code and city name to appear on the
display.
City code
City name
3.
Press (C) twice.
This causes [12H] or [24H] to flash on the
display.
4.
Press (D) to toggle the setting between
[12H] (12-hour timekeeping) and [24H]
(24-hour timekeeping).
24-hour
timekeeping
12-hour
timekeeping
5.
Press (A) to complete the setting
operation.
World Time
You can view the current time in 48 cities (31
time zones), and UTC (Coordinated Universal
Time) time.
Checking World Time
1.
Enter the World Time Mode.
l
Navigating Between Modes
This displays your currently selected
World Time City and the current time
there.
●
You can display the city code and city
name again by pressing (A).
City code
World Time
World Time City Setting
Use the procedure in this section to select a
World Time city. If you are in an area that
observes summer time, you can also
configure a summer time setting.
1.
Enter the World Time Mode.
l
Navigating Between Modes
2.
Use (D) to display the city you want.
3.
To change the summer time setting, hold
down (A) for about two seconds.
●
Each time you hold down (A) for at least
two seconds, the setting will toggle
between summer time and standard
time.
●
[DST] appears whenever the display
current time is summer time.
4.
Press (A) to complete the setting
operation.
Note
●
While [UTC] is selected as the city, you
will not be able to change or check the
summer time setting.
●
The summer time setting you configure
is applied to the currently selected city
only. It does not affect other cities.
Specifying UTC
(Coordinated Universal
Time) as Your World Time
City
In the World Time Mode, pressing (B) and (D)
at the same time will set UTC (Coordinated
Universal Time) as the World Time City and
display its current time.
Watch Operation Guide 5550
10