Casio LWQ-160DE, Руководство по обслуживанию и список запасных частей, Страница: 10 / 14

— 8 —
5-4. TIME CALIBRATION SIGNAL TEST MODE
1) In the Accuracy Checking Mode, press the

button twice to switch to the signal receiving standby
state.
(The last receiving station is indicated with the second hand.)
If the last receiving station is reset with the [All Clear] function, the station to first receive the signal
is indicated.
(JJY40:4sec, JJY60:6sec, WWVB:8sec, MSF:14sec, DCFF:16sec)
2) Press the

button to switch to the Signal Receiving Sensitivity Test Mode.
3) Press the

button to select the receiving station, and then press the

button to start receiving
the signal.
The second hand will move to the READY (33-second) position.
4) The result of the signal reception will be indicated after a while.
Signal recieving department
The result of the signal reception
Success failure
JJY40 1 o’clock 11 o’clock
JJY60 2 o’clock 10 o’clock
WWVD 3 o’clock 9 o’clock
DCF77 4 o’clock 8 o’clock
MSF 5 o’clock 7 o’clock