Casio KL-G2, Руководство пользователя

Страница: 37 / 70

35 EN
5.
Move the cursor to the fi rst character of the text whose size you want to
change and then press
SET .
6.
Move the cursor to the last character of the text whose size you want to
change and then press
SET .
Character size factors
Size of character at
current cursor position
Size factor indicator
Size of printed character
Just Fit Indicator
Any text following this indicator is printed at a
size determined by the Just Fit feature.
•
The size factor indicator and Just Fit indicator appear on the display but are
not printed on the label.
•
To delete a size factor specifi cation, use to delete the size factor
indicator.
•
Deleting a size factor indicator causes the character size to change
automatically in accordance with the tape width and the number of lines.
Note, however that if there is a size factor indicator to the left of the one that
is deleted, the text will change to the size specifi ed by the remaining size
factor indicator.
•
A character size factor specifi cation affects only the block where it is
located.
Specifying the Character Size for a Specifi c Line
of Text
You can use the formats in the table below to specify the character size for a
specifi c line of text.
•
Depending on the number of text lines and the type of tape cartridge loaded
in the printer, printing may not change even if you select a different format.
Number
of Lines
Format
24mm (1"),
18mm (
3
/
4
")
wide
12mm (
1
/
2
")
wide
9mm (
3
/
8
")
wide
1
A 1×1 1×1 1×1
B 2×2 2×2 2×2*
C 3×3 3×3* -
D 4×4 - -
E 5×5* - -
2
A
1×1
1×1
- -
B
1×1
2×2
- -
C
2×2
1×1
- -
D
2×2*
2×2*
- -
E
1×1
3×3*
- -
F
3×3*
1×1
- -