More user manuals on
E-33
Removing
1. Check that the power is turned off.
If the power is on, always make sure to turn it off by pressing the Power Key.
2. Remove the battery pack.
3. Push on the card. Slowly remove the card after it slightly pops out.
Press
Press
4. Load the battery pack.
Important!
•
A miniSD card must be inserted with the top and bottom properly aligned and
in the proper direction. Attempting to insert it with an excessive force in the
incorrect orientation can risk damage to the connectors and slot. Be careful
when inserting a miniSD card.
•
The battery pack will not be able to be properly installed if the miniSD card is
not properly installed. Reinstall the miniSD card properly if this happens.
•
Since data recorded in the Handheld Terminal may be lost if the battery pack is
removed for more than 10 minutes, complete the installation (or removing) of
miniSD card within 10 minutes.
IT600_E_P14_39.p65
05.10.25, 9:50 AM
33
