Casio IT-10M20BR Скачать руководство пользователя страница 16

Страница: 16 / 126

The Rugged PDA and AC adaptor may become warm during
use.

• This is caused by the CPU operation or the current when the Rugged PDA's battery

is charged. This is not malfunction. The heating value charges according to the con-

dition of use.

• When the Rugged PDA or the AC adaptor is warmer than usual, shut down the power,

unplug the power cord of the AC adaptor and remove the battery pack. Contact your

original dealer or authorized CASIO distributor.

Do not continue operating the Rugged PDA until the battery
completely discharges.

• Doing so may result in loss of or damage to your data. Recharge the battery before it

discharges completely.

Use the stylus provided.

• When writing on the screen, be sure to use only the stylus provided (or a similar

product with a soft tip that is not sharp). Remove any dust or dirt from the screen and

the tip of the stylus before writing on the screen. Dirt or dust makes it difficult to

write on the screen and may scratch it.

Avoid using the Rugged PDA in the following locations.

• Places where there is a lot of dust.

• Be careful when using the Rugged PDA in locations where the surrounding tempera-

ture is extremely hot or cold, such as in a car in direct sunlight, in front of heater.

• Places that are very humid or damp.

Avoid vibration and strong impact.

• Strong vibration or impact may damage the Rugged PDA or important data. It also

might damage the LCD screen.

Do not use the Rugged PDA in the rain or places where water
may get on it.

• The Rugged PDA is water splash-resistant, however water entering through the gaps

around buttons and switches may cause a malfunction.

• If rain or water gets on the Rugged PDA, carefully wipe it with a dry cloth.

IT-10/05-20-E.p65

06.6.15, 6:44 PM

Содержание IT-10M20BR































































































































Результаты поиска

Содержание IT-10M20BR

Отзывы:

Похожие инструкции для IT-10M20BR

Бренды по названию

Популярные бренды

Casio IT-10M20BR, Руководство пользователя

Результаты поиска

Содержание IT-10M20BR

Отзывы:

Похожие инструкции для IT-10M20BR

Бренды по названию

Популярные бренды