E-66
1
Terminal Detect
Switch
This switch detects when the IT-9000 is mounted correctly on the
Ethernet Cradle.
2
Mount Hooks
These hooks are used to stabilize the IT-9000 when mounting it
on the cradle.
3
Removal Buttons
Press when removing the IT-9000.
4
Power Supply/Data
Communication
Terminals
Power is supplied to the IT-9000 via these contacts. Also used for
data communication.
5
Power Indicator
LED
This LED indicates the power status and the mounting status of
the IT-9000.
Red: Power on, IT-9000 is not installed.
Green: Power on, IT-9000 mounted correctly.
6
Power Switch
Turns the power on and off.
7
USB Client Port
This port is used to transmit system data and
¿
le data (download,
upload) by connecting the Ethernet Cradle to a PC using a USB
cable (DT-380USB-A). The dedicated driver must be installed in
the PC before connecting the Ethernet Cradle to the PC.
8
USB Host Port
This port is used to connect a corresponding USB peripheral
device.
9
LAN Port
This port is used for connecting the cradle to a PC or hub via a
LAN cable so that system data and
¿
le data can be transmitted
(uploaded or downloaded).
The special driver software must be installed in the IT-9000.
10
LAN Connection
Status LED
This LED shows the status of the LAN connection.
Off: LAN cable not connected correctly.
Lit orange: LAN cable connected correctly.
11
LAN
Communication
Status LED
This LED shows the LAN operation status.
Off: No communication.
Blinking: Communication in progress.
12
Selector Switch
This switch is used to switch between a USB connection and a
LAN connection.
LAN: LAN
A: USB host
B: USB client
13
AC Adaptor Jack
Connect the AC adaptor (sold separately) here.
