— 7 —
2.
Hold down
AAAAA
for about
one second until the hour
digits of the alarm time
start to flash.
•
This is the setting screen.
•
This also causes the alarm
indicator to appear in the top
dial, and automatically turns
on the alarm.
3.
Use the
DDDDD
(+) and
BBBBB
(
–
)
buttons to change the
hour setting.
•
Holding down either button
scrolls the hour setting at high
speed.
•
When setting the hour
, make
sure you specify
AM (no
indicator) or PM (P) correctly
when using 12-hour
timekeeping, or that you
specify the correct 24-hour
time.
•
The same 12-hour/24-hour
format you select for the
T
imekeeping Mode time is
also applied in the
Alarm
Mode.
4.
Press the
CCCCC
button.
•
This moves the flashing to
the minute digits.
As with
the hour setting, use the
D
(+) and
B
(
–
) buttons to
change the minute setting.
5.
After all of the setting is the way you want, press the
AAAAA
button.
•
This exits the setting screen.
•
The watch will also exit the setting screen automatically if you
do not perform any operation for about two or three minutes.
T
u
rning an
Alarm or the Hourly
T
ime Signal On and Off
1.
In the
Alarm Mode, use the
DDDDD
button to select the alarm
(A1 to
A5) or the Hourly T
ime Signal.
2.
Press the
BBBBB
button to toggle the currently displayed
alarm or the Hourly T
ime Signal on and off.
•
T
u
rning on an alarm or the Hourly
T
ime Signal causes its
indicator to appear in the top dial.
•
T
u
rning on an alarm also causes its alarm time setting to
appear in the bottom dial.
Alarm Indicator
Hourly
T
ime Signal Indicator
Alarm 2 Screen
T
imekeepin
g
Screen
Stopping the
Alarm Beeper
Pressing any button while an alarm is sounding stops it.
T
esting the
Alarm
In the
Alarm Mode, hold down the
B
button to sound the alarm
tone.
Y
o
u can set the start time of the time in the range of 1 to 60
minutes, in units of one minute.
The watch beeps for 10 seconds
when the end of the countdown is reached.
T
u
rning on the auto
repeat feature causes the countdown to restart from the start time
whenever the end of the countdown is reached.
T
imer T
y
pes
There are two dif
ferent settings that you can use to configure the
timer as describe below
.
•
Repeat
With Repeat, the countdown stops, the original start time
appears, and the watch beeps for 10 seconds when the end of
the countdown is reached.
•
Auto Repeat
Auto Repeat causes timing to restart from the start time when
the end of the countdown is reached.
•
The countdown repeats up to 10 times, or until you stop it
manually
.
Configuring T
imer Settings
1.
In the T
imer Mode, hold
down
AAAAA
for about one
second until the minute
digits of the timer start
time start to flash in the
bottom dial. This is the
setting screen.
2.
Use the
DDDDD
(+) and
BBBBB
(
–
)
buttons to change the
start time minutes.
•
Holding down either button
scrolls the start time setting at
high speed.
3.
Press the
CCCCC
button to
change to the timer type
setting.
Using the Timer
4.
Use the
DDDDD
and
BBBBB
buttons to select the type of timer
you want to use.
•
T
o
select Repeat, display
“
”.
•
T
o
select
Auto Repeat, display
“
”. Selecting
Auto Repeat
also displays a value in the left dial indicating the current
number of repeats.
or
Number of Repeats
Auto Repeat
Repeat
5.
After the settings are configured the way you want,
press the
AAAAA
button.
•
This exits the setting screen.
•
The watch will also exit the setting screen automatically if you
do not perform any operation for about two or three minutes.
Using the T
imer
In the T
imer Mode, press the
DDDDD
button.
•
Each press of the
D
button starts or stops the countdown.
•
Repeat counts down in 1/10-second units, while
Auto Repeat
counts down in 1-second units.
Repeat
(Start/Stop)
(Reset)
Minutes
1/10
second
Seconds
Minutes
S
econds
Auto Repeat
Number of
Repeats
•
Pressing the
B
button while the countdown is stopped
resets the display time to the start time.
•
Pressing the
D
button again while the timer countdown is
stopped restarts the countdown.
End of Countdown
The watch beeps for 10 seconds when the end of the countdown
is reached.
•
Pressing any button while the beeper is sounding stops it.
Y
o
u can set up to five independent daily alarms.
An alarm sounds
for 10 seconds when an alarm time is reached.
The Hourly
T
ime Signal causes the watch to beep every hour on
the hour
.
Setting an
Alarm T
ime
1.
In the
Alarm Mode, use the
DDDDD
button to scroll
through the alarm
numbers in the left dial
(A1 to
A5) until the one
you want is displayed.
•
The current alarm time setting
for the selected alarm will
appear in the bottom dial.
–
–
:–
–
will appear instead of
the alarm time if that alarm is
turned of
f.
Alarm3
(AL3)
Alarm1
(AL1)
Alarm2
(AL2)
Alarm4
(AL4)
Alarm5
(AL5)
Hourly T
ime
Signal(SIG)
Using Alarms and the Hourly Time Signal
Minutes
(Forward)
(Back)
Minutes
(Forward)
(Back)
Alarm Indicator
Hour
(Forward)
(Back)
Alarm T
ime
Alarm Number Graph
Alarm
Number
(Forward)