– 13 –
13 ––
QW-3403
8. DEVICE TEST: MODULE QW-3403
8-1. DEVICE TEST MODE
Timekeeping mode
Device Test Display
+
+
,
,
Support the 6-o’clock side as a fulcrum
and tilt the watch by 45°
VIBRATOR TEST
(LCD Display: VIB)
EXECUTING MODE
(LCD Display: EXE)
,
,
BEEP
VIBE alarm×2
HOW TO CHECK TILT SENSOR
(LCD Display: TLT)
LCD Display: TLT 8888
* Press
to turn on the light.
,
,
Note:
• The watch returns to the Timekeeping mode when it is left untouched for 1 to 2 hours after the last
button operation. (Auto Return)
• The watch does not return to the Timekeeping mode when the alarm goes off.
• The Auto Light function is disabled when the watch enters the test mode
.
8-2. VIBRATOR TEST
1) While in the Timekeeping mode, hold down
A
and press
D
and
B
at the same time.
2) Press
B
.
3) Check that “VIB” is displayed on the LCD.
4) When you press
D
, the display changes to “EXE”.
5) Press
B
and check that the vibration alarm operates twice after two alarm sounds.
6)
Exit the Vibrator Test mode.
•
Press
D
, then “VIB” is displayed. Press
B
to proceed to How to check Tilt Sensor mode.
• Press
A
or
C
to return to the Timekeeping mode.