11
k
Decimal Point and Separator Symbols
You can use the display setup (Disp) screen to specify the
symbols you want for the decimal point and 3-digit sepa-
rator.
• To change the decimal point and separator symbol set-
COMP
Basic Calculations
ting, press the
F
key a number of times until you reach
the setup screen shown below.
1
D i s p
fx-95MS:
1
r
Other Models:
1
r
r
• Press the number key (
1
or
2
) that corresponds to
the setting you want to use.
1
(Dot):
Period decimal point, comma separator
2
(Comma): Comma decimal point, period separator
k
Initializing the Calculator
• Perform the following key operation when you want to
initialize the calculation mode and setup, and clear re-
play memory and variables.
A
B
3
(All)
=
k
Arithmetic Calculations
Use the
F
key to enter the COMP Mode when you
want to perform basic calculations.
COMP .............................................................
F
1
• Negative values inside of calculations must be enclosed
within parentheses.
sin –1.23
→
S
R
D
1.23
T
• Display the selection screen.
