background image

— 2 —

Delete

Single-file, all files (with protection)

Effective Pixels

5.0 million

Imaging Element

1/2.5-inch square pixel color CCD (Total pixels: 5.25 million)

Lens/Focal Distance

Lenses: F2.6 (W) to 4.8 (T); f=5.8 (W) to 17.4mm (T) (equivalent to approximately 35 (W)

to 105mm (T) for 35mm film)

Six lenses in five groups, including an aspherical lens

Zoom

3X optical zoom; 4X digital zoom (12X in combination with optical zoom)

Focusing

Contrast-type Auto Focus with AF mode (Spot or Multi AF Area), Macro mode, Pan Focus,

Infinity mode, focus lock, manual focus

Approximate Focus Range

Normal: 40cm to 

 (1.3´ to 

)

(from lens surface)

Macro:

6cm to 50cm (2.4˝ to 19.7˝)

Exposure Control

Light Metering: Multi-pattern by CCD

Exposure: Program AE

Exposure Compensation: –2EV to +2EV (1/3EV units)

Shutter

CCD electronic shutter; mechanical shutter, 1/8 to 1/2000 second

• Shutter speed is different for the following BEST SHOT scenes.

Night Scene: 4 to 1/2000 second Fireworks: 2 seconds (fixed)

Aperture

F2.6/4.3, auto switching

White Balance

Automatic, fixed (6 modes), manual switching

Sensitivity

ISO 50, ISO 100, ISO 200, ISO 400, Auto

Self-timer

10 seconds, 2 seconds, Triple Self-timer

Built-in Flash

Flash Modes:

AUTO, ON, OFF, Red eye reduction

Flash Range:

Wide Angle Optical Zoom: 0.4 to 2.6 meters (1.3´ to 8.5´)

Telephoto Optical Zoom:

0.4 to 2.0 meters (1.3´ to 6.6´)

(ISO Sensitivity: “Auto”)

* Depends on zoom factor.

Recording Functions

Audio snapshot; Macro; self-timer; BEST SHOT; Movie with audio; voice recording

• Audio recording is monaural.

Audio Recording Time

Audio Snapshot: Approximately 30 seconds maximum per image

Voice Recording: Approximately 39 minutes with built-in memory

After Recording: Approximately 30 seconds maximum per image

Monitor Screen

2.7-inch TFT color LCD

115,200 pixels (480 x 240)

Viewfinder

Monitor screen

Timekeeping Functions

Built-in digital quartz clock

Date and Time: Recorded with image data

Auto Calendar: To 2049

World Time: City; Date; Time; Summer time; 162 cities in 32 time zones

Input/Output Terminals

Cradle connector

Microphone

Monaural

Speaker

Monaural

Содержание Exilim EX-Z57




































Отзывы: