101
Dynamic Photo
Dynamic Photo
You can use the procedures in this section to crop either a
moving subject or a still subject out of a snapshot and then
insert it into another snapshot or movie.
1.
In the REC mode, press [SET].
2.
Use [
8
] and [
2
] to select the bottom Control Panel option (BS) and
then press [SET] (page 33).
3.
Use [
8
], [
2
], [
4
], and [
6
] to select the “Dynamic Photo” scene and
then press [SET].
4.
Press [SET], use [
8
] and [
2
] to select the third Control Panel option
from the bottom (Select Subject Type), and then press [SET].
5.
Use [
8
] and [
2
] to select “Subject Type”, and then press [SET].
To create a subject image to be inserted (Dynamic Photo)
™
Moving Subject
Another Image
Dynamic Photo Image
