46
Recording Movie Images
NOTE
• Spending a long time using movie recording will cause the camera to become
slightly warm to the touch. This is normal and does not indicate malfunction.
• The camera also records audio. Note the following points
when shooting a movie.
– Take care that the microphone is not blocked by your
fingers, etc.
– Good recording results are not possible when the
camera is too far away from what you are trying to
record.
• Shooting a very bright subject can cause a vertical band or
a pink cast on the monitor screen image. This does not
indicate malfunction.
• Using the camera’s built-in memory or certain types of memory cards can slow
down processing speeds, and even can make it impossible to store High Quality
movies correctly. Also, use of certain types of memory cards slows down data
transfer and increases the time it takes to record movie data, which can result in
breaks in the image and/or audio during playback. If this happens, the
»
and
Y
flash on the monitor screen.
• The effects of camera movement in an image become more pronounced when you
shoot close up or with a large zoom factor.
• You can use the [
4
] and [
6
] keys during movie recording to adjust the EV shift
setting.
Microphone
