APPENDIX
174
Symptom
Possible Cause
Action
Color of the playback
image is different from the
image on the monitor
screen during recording.
Images are not displayed.
Cannot playback audio,
cannot hear audio, or
cannot control the audio
playback using the remote
controller.
Playback time is short.
Sunlight or light from another source is shining
directly into the lens during recording.
A memory card with non-DCF images recorded
with another camera is loaded in the camera.
1) There is no MP3 file data in memory. This is
indicated by the message “NoData” on the
remote controller LCD.
2) Stereo headphones are not connected
correctly.
3) Volume setting is too low.
4) The battery is dead.
5) The remote controller buttons are locked.
6) There are no playable files.
7) Improper PLAYLIST.TXT file contents
The battery is dead.
Playback
Audio Playback
*
Note that audio player capabilities are available with the EX-M20U only.
Position the camera so sunlight does not shine
directly into the lens.
This camera cannot display non-DCF images
recorded onto a memory card using another digital
camera.
1) Transfer MP3 files to the camera’s AUDIO
folder.
2) Correctly connect the headphones to the
headphones jack.
3) Adjust the volume to a higher level.
4) Charge the battery (page 28).
5) Slide the remote controller lock switch in the
opposite direction of the arrow marking to
unlock the controls.
6) Check the files you are trying to play (page 154).
7) Check to make sure the PLAYLIST.TXT file lists
the MP3 files you want to play.
Charge the battery (page 28).
