22
Quick Start Basics
.
To charge using a USB connection to a computer
While the camera and controller are turned off, connect in the sequence shown below
(
,
).
• If the camera or controller is on, hold down [
p
] (power) for about two seconds to
turn it off before connecting to the computer.
NOTE
• If you turn on the camera while charging over a USB connection to a computer is in
progress, the camera will establish a USB connection with the computer. Charging
will continue. Charging will also continue if you turn on the controller. Note that
certain types of computers or connection environments may stop charging if supply
power is low.
Charging time : Camera: Approximately 2 hours 15 minutes
Controller:
Approximately 2 hours 55 minutes
USB
2
1
1
Micro USB cable
(included with camera)
[USB] port
USB port
Computer
(power turned on)
When plugging in the connectors, orient this marking as described below.
Camera : Towards the lens side
Controller: Towards the monitor screen side
[USB] cover