170
Appendix
IMPORTANT!
• Performing the battery refresh operation reduces the battery charge level to almost
zero. Never load refreshed batteries into the camera without charging them first.
Though you may be able to momentarily turn on the camera while refreshed
uncharged batteries are loaded, power may suddenly fail, leaving the lens
extended, or some other misoperation may occur.
• You do not need to perform the above operation each time you charge the
batteries. Only use it if you notice that you are getting less operation between
charges. Note that you may eventually reach the point when even the above
operation will not refresh batteries. If this happens, it means that the rechargeable
batteries have reached the end of their service life and that you will need to
purchase new rechargeable batteries.
• The above notes are all based on use of a recommended type of rechargeable
Ni-MH batteries.
You need to purchase the optionally available AC adaptor (AD-C100) in order to be
able to power the camera using a household power supply.
1.
Connect the power cord to the AC adaptor.
2.
Open the camera’s terminal cover and connect the AC adaptor to the
terminal marked [
].
3.
Plug the power cord into a power outlet.
Using Household Power
[
]
Terminal
cover
AC adaptor
Power cord
Power plug