Presettings on DT-930
Take your DT-930 and switch it on by pressing the buttons [S], [.], and [PW] simultaneously.
You are in the operating system mode (
SYSTEM MENU
) now. You can select a menu item
by pressing its number on the keypad of the mobile terminal. To go one level back press
[CLR].
Starting from
SYSTEM MENU
, choose
3:DATE/TIME
, and enter both date and time
correctly. With the [CLR] button you can return to the
SYSTEM MENU
. Choose
4:TRANSMIT
, and then
4:UTILITY
. Check whether "NORM" is shown beside
4:FILE
MODE
. If not, press key [4] to select
4:FILE MODE
to reach the file mode menu. Push key
[1] to select
1:NORMAL MODE
, and confirm with the [ENT] key. Wait until the drive is
newly formatted. Push [CLR] until you reach the
TRANSMIT
menu again. Check whether
the following entry is shown next to
5: PROTOCOL
: "MLT". If " FLINK " is displayed
instead, press button [5]. You reach the
PROTOCOL
menu. Push button [2] and confirm
again with the [ENT] button.
Check whether "SIR" is shown under
6:PORT
. If not, press button [6]. You enter the
COM
PORT
menu. Push button [1] and the [ENT] button subsequently. Check whether "115K" is
displayed beneath
7:SPEED
. If a different setting is announced, press button [7]. You reach
the
COM SPEED
menu. Push button [6] to select
6:115.2
, and then the [ENT] button.
