Presettings on PC
The presettings mentioned below must be done only once, and can remain unchanged
until you decide using a different configuration.
Save all application data to a folder where it can be found by Multidrop afterwards. Create the
following directories on drive C: on your PC:
•
C:\DT930\MOT
•
C:\DT930\Download
•
C:\DT930\Upload
Start Multidrop on your PC, if it is not running. In the main menu of Multidrop on your PC,
select
Settings
, and then
File setting
. Enter the same settings you can see in the screenshot
below. Confirm your entries with [OK].
If you do not check
Append Mode
, received files from the terminal will overwrite
existing files on PC.
In the next step, select
Settings
again, and then
Communication setting
. Enter the same
settings you can see in the screenshot below, and confirm your entries with [OK].
In Multidrop, the index of COM ports is zero based. Therefore, "COM0" equals COM1:
on your PC, and "COM1" equals COM2: on your PC.
