Casio DT-930M50E, Руководство пользователя

Страница: 53 / 99

Setting up the Bridge Basic Cradle
Connecting without Using the AC Adaptor
· It is possible to draw power from the personal computer in the bus power mode. This
makes it possible to operate the Bridge Basic Cradle without using the AC adaptor.
· Power is not supplied to the DT-930 when the USB connection is used to supply power.
Replace the batteries to transfer data if the low voltage message is displayed on the DT-
930. Also, use a personal computer that has USB connectivity that supports high-power
devices.
· Some personal computers cannot provide a stable power supply, confirm whether your
computer can provide a stable power supply. If it is unstable use the optional AC adaptor.
Important!
on the front of the Bridge Basic Cradle lights green. If it is not correctly
mounted communication cannot be done.
· Do not allow the supply contacts in the Bridge Basic Cradle to short
circuit. If they short circuit it may cause a malfunction.
· Do not shake or hit the Bridge Basic Cradle or DT-930 during
communications over the USB interface. Doing so may interrupt
communications.
· The infrared communication function uses a high-sensitivity
communication element.
To ensure proper communication, avoid using devices that generate
radio waves (for example; cell phones, etc.) in the vicinity of the DT-930
while communication is in progress.
Move these devices away from the DT-930 to use them (cell phones
should be moved more than 30 cm away).
· The cradle does not have the capability of charging battery pack
installed in DT-930.
· The cradle (HA-E60IO) is not operable with DT-900.
E-38