Casio DT-930M50E, Руководство пользователя

Страница: 42 / 99

Using the Bar Code Reader
Adjusting the Laser Beam Width
The width of the laser beam emitted from the Handheld Terminal can be adjusted to match
the width of the bar code that is being read.
When you switch the laser beam width, you must set the beam’s reference point
beforehand.
1
and
system menu.
2
Mode Set
Bar Code
Laser Beam Adjustment
TRG :START
CLR :EXIT
3
adjustment bar code.
* Align the laser beam with the fine bars on
both sides of the adjustment bar code.
(Example)
After first making sure that the laser beam is
emitted at the correct position, hold down the
trigger key for at least one second.
Laser beam adjustment is completed when
you release the trigger key.
TRG :RETRY
CLR :EXIT
E-30