Casio CTK-6200 Скачать руководство пользователя

Страница: 77 / 132

Using the Song Sequencer

E-75

Perform the procedure under “To start a song
editor operation” on page E-74 to display the
song editor menu, with the

located at

“Clear”.

Press the R-16 (ENTER) button.

• This displays the “Clear Song” screen.

Use the dial or R-14 (–, +) buttons to specify the
song area number you want to clear.

• An asterisk (

) next to a song area number indicates

that there is already data recorded in that area.

• You can select “All” here to clear all songs.

Press the R-16 (ENTER) button.

In response to the “Sure?” message that
appears, press the R-14 (YES) button to clear or
the R-14 (NO) button to cancel.

Perform the procedure under “To start a song
editor operation” on page E-74 to display the
song editor menu.

Use the R-17 (

) button to move the

“Copy” and then press the R-16 (ENTER)
button.

• This displays the “Copy Song” screen. At this time the

thick brackets (

) will be located at the “Copy”

setting.

Use the dial or R-14 (–, +) buttons to specify the
song area number you want to copy from.

Press the R-17 (

) button to move the thick

brackets (

) to “To”.

• An asterisk (

) next to a song area number indicates

that there is already data recorded in that area.

Use the dial or R-14 (–, +) buttons to specify the
song area number you want to copy to.

Press the R-16 (ENTER) button.

• If the copy destination song area does not contain

recorded data, the copy operation is performed
immediately.

• If the copy destination song area already contains

recorded data, The confirmation message shown below
appears asking if you want to overwrite the existing
data.

Press the

R-14 (YES)

button to perform the copy

operation and overwrite the existing song or the

R-14

(NO)

button to cancel.

To clear a song

To copy a song from one area to another

Содержание CTK-6200





































































































































Результаты поиска

Содержание CTK-6200

Отзывы:

Похожие инструкции для CTK-6200

Бренды по названию

Популярные бренды

Casio CTK-6200, Руководство пользователя

Результаты поиска

Содержание CTK-6200

Отзывы:

Похожие инструкции для CTK-6200

Бренды по названию

Популярные бренды