Casio CTK-6200 Скачать руководство пользователя

Страница: 116 / 132

Reference

E-114

Troubleshooting

Symptom

Action

Included Accessories

I can’t find something that should be
included with the product.

Carefully check inside all of the packing materials.

Power Requirements

Power will not turn on.

• Check the AC adaptor or make sure that the batteries are facing correctly

(page E-9).

• Replace the batteries with new ones or switch over to AC adaptor power

(page E-9).

• You may have tried to perform some operation while the “Please Wait”

message was displayed, which caused an internal problem. If other
measures do not correct this problem, perform the operation below to turn on
power.

Warning!

The following operation will delete all Digital Keyboard data and return all
settings to their initial factory defaults.

While holding down the

R-2 ([B] E.Piano)

and

R-5 ([E] BASS)

buttons, press

the

L-1 (POWER)

button to turn on power.

The display lights up momentarily but power
does not turn on when I press the

L-1

(POWER)

button.

Press the

L-1 (POWER)

button firmly and completely to turn on power.

The Digital Keyboard outputs a loud sound
and then suddenly powers down.

Replace the batteries with new ones or switch over to AC adaptor power (page
E-9).

The Digital Keyboard suddenly powers down
after a few minutes.

This happens when Auto Power Off (page E-13) is triggered.

Display

The display keeps going out or is flashing.

Replace the batteries with new ones or switch over to AC adaptor power (page
E-9).

Screen contents are visible only from straight
ahead.

This is due to production limitations. It does not indicate malfunction.

Sound

Nothing happens when I press any keyboard
key.

• Adjust the main volume setting (page E-13).
• Check if something is plugged into the

T-8 (PHONES)

jack on the back of the

Digital Keyboard.

• Turn power off and then back on to initialize all keyboard settings (page

E-13).

Nothing happens or notes do not play
normally when I play on the left side of the
keyboard.

Press the

L-17 (ACCOMP ON/OFF)

button to disable chord input with chord

keyboard (page E-24).

Nothing happens when I start an Auto
Accompaniment.

• With rhythms E:029 to E:038, nothing will sound until you play a chord on the

keyboard. Try playing a chord (page E-26).

• Check and adjust the accompaniment volume setting (page E-98).
• If there is no user rhythm stored in memory, Auto Accompaniment will not

start when you press the

L-16 (START/STOP)

button while a rhythm in the

range of F:001 to F:010 is selected (page E-24).

• Turn power off and then back on to initialize all Digital Keyboard settings

(page E-13).

The metronome does not sound.

• Check and adjust the metronome volume setting (page E-98).
• Turn power off and then back on to initialize all Digital Keyboard settings

(page E-13).

Содержание CTK-6200





































































































































Результаты поиска

Содержание CTK-6200

Отзывы:

Похожие инструкции для CTK-6200

Бренды по названию

Популярные бренды

Casio CTK-6200, Руководство пользователя

Результаты поиска

Содержание CTK-6200

Отзывы:

Похожие инструкции для CTK-6200

Бренды по названию

Популярные бренды