PAGE
32
32
32
32
32
ROUBLESHOOTING
T
"Blocked" and "Unavailable" Messages
If a caller chooses to partially or completely "block"
a call, a message will appear on the display
indicating that the name and/or phone number has
been blocked:
BLOCKED
# BLOCKED
Time and date information of for the call will still be
recorded into the CP-725's memory.
If, for any other reason, the name and/or number
information is currently not available from your local
phone company, an "Unavailable" message will
appear on the display:
UNAVAILABLE
# UNAVAILABLE
Again, the time and date information for the call
will still be recorded into the CP-725's memory.
Local Area Code Setting
The CP-725 can make returning phone calls
easier by automatically dialing stored Caller ID
numbers. In order for this feature to work
correctly, it is necessary to program your local
area code into the unit. (See page 25)
Outside line programming
After you change the Outside Line option, you must
re-program the Local Area Code setting before you
return the handset to the charging cradle in order for
the CP-725 to function properly.
Call Waiting Caller ID does not work
1. You must subscribe to Call Waiting and
Caller ID services from your local
telephone company to use this feature.
2. Turn the CP-725's Call Waiting Caller ID
option on. (see page 26)
No Telephone Line Indicator
If the telephone cord is not properly plugged into
the telephone wall jack, the
CHARGING
INDICATOR will flash.
No sound from the handset
Check the
VOLUME CONTROL. It may have
been programmed to a low level. (see page 25)
Connect the telephone cord to the wall jack.
The
CHARGING INDICATOR flashes rapidly.
1. Was the battery pack charged for at least
12-15 hours? Does "Low Battery" appear on
the display?
2. Check the AC adapter connection at the
charging cradle and wall outlet.
3. Check the telephone cord connection.
4. Check the connection of the battery pack.
(see page 30.)
No Dial Tone is heard when calling out.
The handset does not ring.
1. Check the ringer setting and make sure it is
not set to "OFF".
2. Check AC ADAPTER and telephone cord
connection.
3. Was the battery pack charged for at least
12-15 hours? Does "Low Battery" appear on
the display?
"Line Error" Message
The "Line Error" message may occasionally
appear due to electrical static on the
telephone line. This is normal. However, if you
consistantly see this message when you
should be receiving Caller ID data (i.e.
between the first and second rings), you may
have a problem with your phone line. Contact
your local telephone company.
