Getting Ready
EN-59
En
g
lish
5.
N
ext, sec
u
re the
b
ottom of the
b
ack panel
with the three
screws.
•
If you cannot see the screw holes along the bottom
the back panel
, slide the back panel
to the left
or right.
6.
Sec
u
rely tighten the
screws yo
u
partially
tightened in step 4 a
b
ove.
7.
Adj
u
st the height adj
u
stment screw
to
provide s
u
pport so crosspiece
does not
b
ow downwards when the pedals are
pressed.
• Pressing the pedals witho
u
t first adj
u
sting height
adj
u
stment screw
can res
u
lt in a
b
normal noise
and/or damage to crosspiece
. Be s
u
re to adj
u
st
height adj
u
stment screw
.
8.
Place the piano onto the stand.
• In order to ens
u
re yo
u
do not get yo
u
r fingers
pinched
b
etween the piano and the stand, grasp the
piano on its sides (not its ends) at the locations
marked with stars (
) in the ill
u
stration.
•
Place the piano onto the stand starting the Digital
Piano unit as much to the front of the stand as
possible, and then slide it into place. Take care to
avoid contact between the speaker boxes on the left
and right sides on the bottom of the Digital Piano and
the stand.
•
At this time the screws on the bottom of the piano
should hook into the cutouts in the stand brackets
.
At least 10cm
At least 10cm
Bracket c
u
to
u
t
Back of piano
Stand side panel
