EN-58
Getting Ready
1.
Unfasten the
b
and
that
bu
ndles the pedal
ca
b
le to the
b
ack of crosspiece
and p
u
ll
the pedal cord o
u
t from the crosspiece.
2.
Attach side panels
and
to crosspiece
. Sec
u
re the side panels
u
sing fo
u
r screws
.
•
When installing parts
, slide the brackets
into
the slots in either end of crosspiece
. If the brackets
are not inserted into the ends of the crosspiece
as far as they will go, the screws
will not be able to
enter into the screw holes of the brackets
, which
can strip the threads of the screws.
•
Cover the screw heads with the caps
.
3.
Slide
b
ack panel
into the grooves
of
the side panels.
•
When installing back panel
, make sure that the
high screw holes of the back panel are to the right,
and the low screw holes are to the left.
4.
Attach the left side of
b
ack panel
to the
b
racket
of side panel
, and the right
side to side panel
. Partially tighten two
screws to hold the
b
ack panel in place
temporarily.
•
At location
, slip the clip
onto to the screw
before installing the screw.
1
Pedal ca
b
le
High
Low
