Casio CDP-S160, Руководство пользователя

Страница: 8 / 32

EN-7
Overview and Setup
■
To change the functions assigned to pedals
1.
While holding down
3 FUNCTION
, perform
procedure (A) or (B) below.
(A) Press the PEDAL TYPE (E6) keyboard key.
• Each press changes the setting. The setting that is
selected by a key press will be indicated by the
number of beeps that sound.
• You can also cycle back or forward through the
above settings using the [–] (D4) and [+] (E
}
4)
keyboard keys.
• To return to the initial default setting (1), hold down
the [–] (D4) and [+] (E
}
4) keyboard keys at the
same time until a long beep sounds.
(B) Press the PEDAL TYPE keyboard key (E6), and then
press a keyboard key in the range of [1] (F4) through
[5] (A4).
• This will cause a short and then long beep to
sound, indicating that the operation is complete
and that the pedal setting (1 to 5 as shown in the
table above) corresponding to the key you pressed
is now enabled.
• Pressing a keyboard key outside the range of
setting keys will cause a high and then low beep to
sound, indicating that the setting was not changed.
2.
Release
3 FUNCTION
.
Using headphones cuts off output from the built-in speakers,
which means you can practice playing even late at night
without disturbing others.
• Be sure to turn down the volume level before connecting
headphones.
• Headphones do not come with the Digital Piano.
• Use commercially available headphones. See page
EN-1
for information about options.
• Do not listen to very high volume output over
headphones for long period. Doing so creates the risk
of hearing damage.
• If you are using headphones that require an adaptor
plug, make sure you do not leave the adaptor plugged
in when you unplug the headphones. If you do, nothing
will sound from the speakers when you play.
Beeps/
Setting
Provided Pedal
Function
Pedal Unit Functions
1 Damper Left: Soft
Center: Sostenuto
Right: Damper
2 Metronome start/stop
3
3 FUNCTION
button
operation
4 Recording standby
enter/exit
5
3 FUNCTION
button
operation
Left: Recording
standby enter/exit
Center: Metronome
start/stop
Right: Damper
C1 C2 C3 C4 C5 C6 C7 C8
1 3 5
2 4
[1] (F4) to [5] (A4) keys
[+] key (E } 4)
[–] key (D4)
PEDAL TYPE key (E6)
Using Headphones
8 PHONES/OUTPUT jack
(Stereo mini jack (3.5mm))
Stereo mini plug