Casio CDP-S160, Руководство пользователя

Страница: 16 / 32

EN-15
Digital Piano Operation
■
To change the reverb and chorus settings of a
recorded performance
1.
Perform one of the operations below to select
the reverb or chorus effect you want to apply to
the recorded performance.
“ To add reverb to notes ” (page EN-10 )
“ To add the chorus effect to notes ” (page EN-10 )
2.
While holding down the
3 FUNCTION
button,
perform steps (1) and (2) below.
(1) Press the RECORDER SETTING (D6) keyboard key.
• This causes a short beep to sound.
• Note that performing step (2) below will change
the setting of the previously recorded data. If you
want to cancel the setting change operation at this
point, release
3 FUNCTION .
(2) Press the G7 (Execute) keyboard key
• This will cause a short and then long beep to
sound, indicating that the operation is complete.
3.
Release
3 FUNCTION
.
■
To delete a recorded performance
1.
While holding down the
3 FUNCTION
button,
perform steps (1) and (2) below.
(1) Press the RECORDER CLEAR (E
}
6) keyboard key.
• This causes a short beep to sound.
• Note that performing step (2) below will delete the
previously recorded data. If you want to cancel the
delete operation at this point, release
3 FUNCTION
.
(2) Press the G7 (Execute) keyboard key
• This will cause a short and then long beep to
sound, indicating that the operation is complete.
2.
Release 3 FUNCTION .
C1 C2 C3 C4 C5 C6 C7 C8
RECORDER SETTING key (D6)
G7 (Execute) key
C1 C2 C3 C4 C5 C6 C7 C8
RECORDER CLEAR key (E
}
6)
G7 (Execute) key