E-9
Top
Back
Bottom
13
20
17
16
19
14
18
15
11
12
Locks optional PC card in place. Make sure this button is in the LOCK
position when using a PC card. The PC card is not detected by the
Data Collector when this button is in the LOCK release position.
Press this button (after opening the PC card slot cover and setting the
PC card lock button to lock release position) to eject a PC card
installed in the Data Collector.
Open when inserting or removing a PC card.
For connection of the neck strap.
These connectors mate with Optical Communication Unit connectors
to receive electrical power for charging of the lithium ion battery pack.
Houses the lithium battery used for memory backup.
Slide to open the battery pack cover.
Houses the lithium ion battery pack that is the Data Collector’s main
power supply.
Use a paper clip or other thin, pointed object to press this button to
launch the Data Collector’s system initialization routine.
For connection of future expansion options.
11
PC card lock button
(inside PC card slot
cover)
12
PC card eject button
(inside PC card slot
cover)
13
PC card slot cover
14
Neck strap bars
15
Charger connectors
16
Backup battery
compartment
17
Open button
18
Lithium ion battery
pack compartment
19
Initialize button
20
14-pin serial interface
connector
Note!
Pressing the Initialize button clears all data and programs from memory.
Never press the Initialize switch unless absolutely necessary.
