Casio Casiotone LK-S450, Руководство пользователя

Страница: 149 / 218

Configuring Settings
EN-148
Lesson Note Sound
Guide Can be used to disable Note
Sound Guide during lessons. Note Sound
Guide Off, On (Initial
Default: On)
Lesson Evaluation Can be used to disable lesson
evaluation at the end of a
lesson. Lesson
Evaluation Off, On (Initial
Default: On)
Tuning Can be used to fine tune the
overall pitch by changing the
frequency of A4 in 0.1Hz units. Tuning 415.5Hz to 440.0Hz
to 465.9Hz
(Initial Default:
440.0)
Surround Can be used to create a more
expansive sound. Surround Off, On
(Initial Default: Off)
AUDIO IN center cancel Can be used to cancel the
center part of audio input using
the
AUDIO IN jack or Bluetooth
audio.
Audio In Center
Cancel Off, On
(Initial Default: Off)
MIDI OUT Channel
UPPER1 Can be used to change the
channel of MIDI messages that
are MIDI output by UPPER1
play. MIDI Out Ch
Upper1 Off, 1 to 16
(Initial Default: 1)
MIDI OUT Channel
UPPER2 Can be used to change the
channel of MIDI messages that
are MIDI output by UPPER2
play. MIDI Out Ch
Upper2 Off, 1 to 16
(Initial Default: 2)
MIDI OUT Channel
LOWER Can be used to change the
channel of MIDI messages that
are MIDI output by LOWER play. MIDI Out Ch
Lower Off, 1 to 16
(Initial Default: 3)
MIDI In Navigate Can be used to it possible to
enable use of the NAVIGATE
function that causes Keyboard
Lighting to be controlled by MIDI
IN note messages. MIDI In Navigate Off, Listen, Right
Hand Off, Left Hand
Off, Both Hand Off
(Initial Default: Off)
MIDI In Navigate Channel
Right Hand Can be used to change the
channel of the note message
that operates as the right-hand
melody for the NAVIGATE
function. MIDI In Navi Ch
Right 1 to 16 (Initial
Default: 4)
MIDI In Navigate Channel
Left Hand Can be used to change the
channel of the note message
that operates as the left-hand
melody for the NAVIGATE
function. MIDI In Navi Ch
Left 1 to 16 (Initial
Default: 3)
Local Control Selecting “Off” disables output of
sound when something is played
on the Digital Keyboard. Local Control Off, On
(Initial Default: On)
Auto Power Off Can be used to enable/disable
Auto Power Off. Auto Power Off Off, On
(Initial Default: On)
Function Name Description Display Name Setting