Casio Casiotone CT-S1, Руководство пользователя

Страница: 66 / 82

Connecting with External Devices
EN-65
■
Sounding Input From an External Device on This Digital Keyboard
Connection requires commercially available connecting cords, supplied by you.
The connecting cord should have a stereo mini plug on one end for connection to this Digital Keyboard
and a plug that matches the configuration of the output jack of external device on the other end.
When sounding input from an external device with this Digital Keyboard, use the external device
controls to adjust the volume level. In this case, you cannot adjust the volume level on this Digital
Keyboard.
•
Turn off this Digital Keyboard before connecting. Before turning power on or off, turn down
the volume level of the Digital Keyboard and external devices.
•
After connecting, turn on the external device and then this Digital Keyboard.
•
If external device notes sounded by this Digital Keyboard are distorted, lower the external
device’s volume level.
•
If the volume level of the external device notes sounds by this Digital Keyboard lower than the
volume level of the notes you are playing on the keyboard, adjust the volume level of each
Digital Keyboard part to balance them. See “
Adjusting the Volume Level of Each Part ” on
page EN-33 .
•
Setting the volume level of the external device too high can cause Digital Keyboard power to
turn off in order to protect it against damage. If this happens, lower the volume level of the
external device.
•
The end of the connecting cord you connect to the Digital Keyboard must have a 3.5mm
3-pole stereo mini plug. Use of other types of plugs is not supported.
■ AUDIO IN center cancel (Vocal Cut)
Enabling Vocal Cut cuts (mutes or minimizes) the vocal part in the sound being input with the
AUDIO
IN
jack or Bluetooth audio. Note that this function cancels the sound in the center position of the audio,
which may (depending on how the original audio was mixed) end up canceling something else other
than the vocal part. How vocal cut is performed depends on the sound being input.
For information about how to configure settings, see the “
Keyboard Keys Used for Configuring Settings ”
(pages EN-49 through 58 ).
•
Built-in effects (reverb) of the Digital Keyboard are not applied to
AUDIO IN
jack input.
Stereo mini plug
Portable audio player, etc.
AUDIO IN jack (3.5mm stereo mini jack)