E-30
Music Presets
■
To edit Auto Accompaniment parameters
1.
On the editing operation selection screen (page E-27), select “Parameter” and then press the
dp
(ENTER)
button to display the Auto Accompaniment parameter editing screen shown below.
2.
Use the
dn
(
u
)
and
do
(
i
)
buttons to select a parameter, and the
ct
(
w
,
q
)
buttons to change its
setting.
3.
After all editing operations are complete, press the
dm
(EXIT)
button to return to the editing operation
selection screen (page E-27).
Parameter
Description
Setting
1
SYNCHRO TYPE:
Synchro type
Selects the synchro standby status and type
when the Music Preset is selected.
0 Off: Off (no standby)
1 Normal: From standby to normal pattern
2 Variation: From standby to variation pattern
3 Intro: From standby to intro pattern
2
DRUM ON/OFF:
Drum on/off
Toggles the drum part (page E-19) on or off.
OFF: Mutes the part.
ON: Sounds the part.
3
PERC ON/OFF:
Percussion on/off
Toggles the percussion part (page E-19) on or
off.
OFF: Mutes the part.
ON: Sounds the part.
4
BASS ON/OFF:
Bass on/off
Toggles the bass part (page E-19) on or off.
OFF: Mutes the part.
ON: Sounds the part.
5 - 9
CHORD1 - 5
ON/OFF:
Chord 1 - 5 on/off
Toggles the Chord 1 through 5 parts (page
E-19) on or off.
OFF: Mutes the parts.
ON: Sounds the parts.
10
INTRO CHORD:
Intro chord
Selects from among major (× 12 keys) and
minor (× 12 keys) for the intro chords.
C - B: Major (C to B)
Cm - Bm: Minor (Cm to Bm)
11
ENDING CHORD:
Ending chord
Selects from among major (× 12 keys) and
minor (× 12 keys) for the ending chords.
C - B: Major (C to B)
Cm - Bm: Minor (Cm to Bm)
12
AUTO FILL-IN:
Auto fill in on/off
Specifies whether or not a fill-in should be
inserted into the final measure of a chord
progression.
OFF: Fill-in not inserted
ON: Fill in inserted
13
TIMING SET:
Chord progression
variation
This parameter lets you add different
variations to the timing of the chord
progression being edited. You can use it to
match the chord progression to the beat of a
specific rhythm.
• A chord (step) that is outside of the rhythm’s
beat is cut off.
1 Normal: Edited chord progression proceeds
as-is.
2 Half: Halves chord timing within a measure.
3 Double: Doubles chord timing within a
measure.
4 3/4: Multiplies chord timing within a measure
by 3/4. Select this setting to match to a
6/8 time rhythm.
5 6/4: Multiplies chord timing within a measure
by 3/2. Select this setting to match to a
6/4 time rhythm.
Setting
Parameter
