Q6
Why is the current time indicated by
the watch is off by a certain amount
of time (nine hours, three hours and
15 minutes, etc.)?
The city setting is not correct. Select the
correct setting.
l
Q7
The current time indicated by the
watch is off by one hour or 30
minutes.
The summer time setting may not be correct.
Select the correct setting.
l
Q8
The time indicated by the hands is
different from the displayed time.
Strong magnetism or impact can cause the
hands to go out of alignment. Adjust hand
alignment.
l
Crown Operations
Q1
Nothing happens when I rotate the
crown.
If you do not perform any operation for about
two minutes after pulling out the crown
(approximately 30 minutes in the case of hand
and day indicator alignment), crown
operations will automatically become
disabled. Push the crown back in to its normal
position and then pull it out again to re-enable
crown operations.
l
Charging
Q1
The watch does not work even
though it is exposed to light.
The watch stops operating whenever the
battery goes dead. Keep the watch exposed
to light until it recharges sufficiently.
l
Q2
[RECOVER] is flashing on the
display.
The watch is in the charge recovery mode.
Wait until the recovery process is complete
(about 15 minutes). The watch will recover
more quickly if you place it in a brightly lit
location.
●
If a sensor measurement operation,
illumination and/or other power-intensive
functions are used within a short period of
time, the charging capacity of the battery
drops and causes the watch to go into a
charge recovery mode. Function availability
is temporarily limited, but functionality
returns after the battery recovers.
l
Q3
[CHARGE] is flashing on the digital
display.
The charge level of the watch is extremely low.
Immediately expose the watch to light to
charge it.
l
Other
Q1
I can’t find the information I need
here.
Visit the website below.
https://world.casio.com/support/
Watch Operation Guide 5678
37
